Howdy,
Picked up a used WRTP54G-NA adapter. Yes it is the NA.. The device doesn't have the -NA stamped on it but the box does with the matching MAC and serial number. Firmware Version: 3.1.24
Trying to use CYT 4.6 to unlock it, this version (after trying a few of the 3. versions) sees the device..
Silly question, does CYT only work for Vonage units? I thought it worked for all of the providers.
It is trying to register to ip.wrtp54g.sipura.rgns.net Galaxy Telecom, which after a couple buy-outs and name changes is currently TNW tnwcorp.com.
Tried contacting them just in case they knew or would release the Admin password, was told it was used on Xplornet's telephone service. But they told me they didn't know what the password was. I didn't know that Xplornet had VoIP service until this week, but contacting Xplornet about anything is a waste of time to say the least. :(
Trying to use CYT to unlock this, I get this far
CYT-Unlocker - Local network version v4.6_ Device IP Address: 192.168.15.1 CYT Model: WRTP54G Your device has several login accounts. The security-level for each is different. You should assign your device unique passwords to keep it secure. Login Name Default Password Description admin admin ROUTER-level access (lowest) user tivonpw USER-level access (medium acc) Admin (unique value) ADMIN-level access (full acc) Note: Some devices change the Login Name.. These passwords listed below will be set on your device. ADMIN-Level login: Admin ADMIN-Level password: Admin USER-Level login : user USER-Level password : user --------------------------------------------------------------------------------Make changes to the values above & press [ENTER] to begin updating your device STATUS: Please Verify Settings Your Device is: WRTP54G
Pressing Enter..
Simple XML provision server is waiting for your device..This should only take up to one minute.If it takes more than one minute, you may stop the XMLprovision server by pressing the [ESC] key.
But no further, and yes I completely disabled the firewall (after the pop-up asked me if I wanted to allow it), also tried running as Administrator.
Ping hack, if I am doing it right is not enabling the bootloader console. The pings do show on the console though.
DSLR wouldn't let me post in the thread about the CYT tool, too old.. haha So creating this one.
↧