[Voip.ms] Call Filtering glitch still not corrected

Back in November 2014, I reported a GIGUNDA GLITCH in the Voip.ms CallerID Filtering 'sorting methodology' when using  *  (as opposed to  xes)  as a wild card in phone number entries. A bunch of responses resulted ... some "getting it" and others twisting the logic of "specificity" into a pretzel. https://www.dslreports.com/forum/r29695443 Well! The glitch is still present ... and truly annoying (although I love everything else about the Voip.ms feature set). Meanwhile, both CallCentric and VOIPo do the sorting process correctly ... VOIPo's Call Routing - Incoming as soon as you record each entry ... CallCentric's Call Treatment when you click on Normalize Priority after you record the entries. Can you spot the flaw in the following comparative examples, reflecting the ordering results for Voip.ms and CallCentric? Voip.ms Sorting Result                                                                                                                   CallCentric Sorting Result Incoming CallerID          Routing                                          Note                                                               Incoming CallerID        Routing                                         Note 2015513710             Forward to 5618885678        Fwd Pluto to Minny's Cell                             2015513710            Forward to 5618885678        Fwd Pluto to Minny's Cell 973*                         [System] Hangup                   Area Code 973 Block                                    9732461*                 [IVR] Are you human             Send 246-1xxx thru IVR                            9732461*                 [IVR] Are you human             Send 246-1xxx thru IVR                                9732463535            Forward to 5619994321         Fwd Goofy to Mickey's Cell 9732463535            Forward to 5619994321         Fwd Goofy to Mickey's Cell                           9736271144            Forward to 5619994321         Fwd Porky to Mickey's Cell 9736271144            Forward to 5619994321         Fwd Porky to Mickey's Cell                           9734170110            Forward to 5619994321         Fwd Waldo to Mickey's Cell 9734170110            Forward to 5619994321         Fwd Waldo to Mickey's Cell                          973*                         [System] Hangup                   Area Code 973 Block 9824374142            Forward to 5618885678         Fwd Daisy to Minny's Cell                             9824374142            Forward to 5618885678         Fwd Daisy to Minny's Cell xxxxxxxxxx              [SIP] UserID                           All other calls go to SIP device                      * or  xxxxxxxxxx      [SIP] UserID                           All other calls go to SIP device $fontbg With the Voip.ms ordering, not a single call with a 973 Area Code will get through, resulting in a hangup. Calls to any other area codes would be handled correctly ... including arriving at the SIP device (bottom of list) so long as the incoming numbers were not filtered out during the parsing process. $Fontbg